If you are not comfortable doing this type of work, please find
someone nearby to make these changes. If you feel like you need
telephone support to accomplish this, I am more than happy to help,
however, phone support, as stated when you signup, is at an hourly
rate. For details, you may contact me at KenKnight@starband.net
Troubleshooting
"Accelerator Down" on the 360
by Ken Knight
Ok folks, here's the deal on what I've
encountered with the "accelerator down" problem.
While we might at first want to jump on the "it's Starband's
problem", it actually turns out to be a problem of left over
junk in the registry under the network adapters section. This
causes the install not to bind to the appropriate adapters. So
what we end up with is the Starband installation process finding a
problem on the local PC which causes a problem for the Starband installation.
This appears to be happening on the 2.0.1.9
versions of the CD and prior. So here's what we're going to
do. I'm going to give you a 12 step potential fix for the
problem. I use the word potential for two reasons;
There's no guarantee it'll fix the problem but it should.
You're going to be messing around in the
registry, which is a dangerous place to be, so proceed
at your own risk.
Ok, now... you did get the part about "proceeding at your own
risk", right?
Now, what you want to do is download the pdf and print it out.
Follow this step-by-step and hopefully after you're done, you'll be
cruising the highways at full speed once again.
